Lamp Tutorial

Materials Needed:
Two marbles or round beads, roughly 3/4"
Snap fastners
Clear straw (I used one that came with a juice box.)
Super Glue
Bell cap
Toothpick
All Purpose scissors
Step#1 - Using the Super glue, glue the bell cap to the bottom of one of the beads. Let glue dry. For more stability, push a toothpick through the hole of the bead until it is even with the bottom edge of the bell cap. Using all-purpose scissors trim off the remaining part of the toothpick.
Step#2 - Take one of the snap fastners and carefully put Super glue along the small inner circle edge. Attach to the bead that will be the top part of your lamp. Let glue dry.
Step#3 - Place some Super glue on the very bottom of the top part of the lamp and press firmly to the bottom part of the lamp.
Step#4 - Using all-purpose scissors, cut off a length of the clear straw - about 1/2" long.
Step#5- Place a bit of Super glue along the bottom edge of the straw and attach to the top of the lamp.
Step#6 - Using the fastener that looks like the pictures below, place a small about of Super glue on the 5 little prongs. Slide the fastener over the straw part of the lamp and press lightly to attach to the top of the lamp.
All finished! You now have a pretty little lamp:)